rossiv
Guru
- Joined
- Oct 26, 2008
- Messages
- 2,624
- Reaction score
- 139
I bought a VVX 410 new to take with me abroad this summer and while I was over there, all inbound voice was garbled. It wasn't terrible to the point of not being able to hear, but voices are noticeably distorted. "Garbled" is the closest word I can use to describe what's happening.
I've been back stateside for a while but just now got back to plugging this phone in. It's doing the same thing here, except only for calls inbound from trunks. (Granted, I didn't have a second extension before to test internal...) MoH, internal calls, and anything except calls from outside sound perfect. It doesn't matter which trunk it comes in on - VoIPms, Anveo, or an Obi110 - the voice always has the same garbling. Outbound voice (that is, my voice to the caller) is not affected in the slightest. Other extensions aren't affected - their voice is perfect inbound and outbound as it should be.
I've tried factory resetting, checking the codecs, and I'm out of ideas. Anyone have a thought?
I use G722 on this one for internal, but ulaw for everything else. Looking at the calls, it's negotiating ulaw as it should, so it shouldn't be a transcoding problem. I'm really stumped.
I've been back stateside for a while but just now got back to plugging this phone in. It's doing the same thing here, except only for calls inbound from trunks. (Granted, I didn't have a second extension before to test internal...) MoH, internal calls, and anything except calls from outside sound perfect. It doesn't matter which trunk it comes in on - VoIPms, Anveo, or an Obi110 - the voice always has the same garbling. Outbound voice (that is, my voice to the caller) is not affected in the slightest. Other extensions aren't affected - their voice is perfect inbound and outbound as it should be.
I've tried factory resetting, checking the codecs, and I'm out of ideas. Anyone have a thought?
I use G722 on this one for internal, but ulaw for everything else. Looking at the calls, it's negotiating ulaw as it should, so it shouldn't be a transcoding problem. I'm really stumped.
Code:
Incredible PBX 11.15.0 for Ubuntu 14
Asterisk: UP Apache: UP MySQL: UP
SendMail: UP IPtables: UP SSH: UP
LAN eth0: UP Fail2Ban: UP Webmin: UP
RAM: "Ubuntu 14.04.2 LTS" Disk: 77G
Asterisk 11.17.1 FreePBX 2.11.0.34
Private IP: 10.0.50.2
Public IP:
System Time: Wed Nov 11 00:27:24 EST 2015
< OK >