wardmundy
Nerd Uno
- Joined
- Oct 12, 2007
- Messages
- 19,206
- Reaction score
- 5,229
Great list of places to route telemarketers on DSL Reports this week.
Can anyone confirm if IncrediblePBX12 (Ubuntu) Lenny is working for them? As a test I routed a DID to Lenny's extension but just get "congestion" tones.
Lenny's ext is set to dial: SIP/[email protected]
Hmmm. No dice. Just rings about 5 times before giving up....
So I was able to integrate Lenny back in to the Gotcha Free pbx for Raspberry PI. I used the instructions for the first page with some slight modifications.
- the lenny.tgz is now gone, I was able to find Lenny.zip on DSL reports
- Files 1-9 need to be renamed, Lenny1.ulaw needs to be named Lenny01.ulaw 02, 03 etc...
- The instructions assume the extensions_custom.conf has a "BEGIN Lenny Remake" section, well it doesn't anymore. Instead there's a [CallingRule_SIP_URI] section that has the SIP dialplan for Lenny. You can use that and bag the whole endevor... unless you want the recordings of Lenny, then you need to put the contents of lenny.txt into that section, replacing the SIP stuff that's there
- So skip the two lines in the instructions that start with "sed" since you did the same thing manually in #3
- If you want the recordings emailed to you, you're going to need to "apt-get install mime-construct" because it's missing, also it gets installed to /usr/local/sbin/mime-construct
Working inbound call with inbound route set to extension 701:
[2015-07-20 18:38:45] VERBOSE[29105][C-0000011b] pbx.c: -- Executing [dstring@macro-dial-one:10] NoOp("SIP/IPComms1-in-0000010d", "Debug: Found PJSIP Destination PJSIP/701, updaing with PJSIP_DIAL_CONTACTS") in new stack
[2015-07-20 18:38:45] VERBOSE[29105][C-0000011b] pbx.c: -- Executing [dstring@macro-dial-one:11] Set("SIP/IPComms1-in-0000010d", "THISDIAL=PJSIP/701/sip:701@[MY IP ADDY]:52389;rinstance=[STRING THAT LOOKS LIKE A MAC ADDY]") in new stack
[2015-07-20 18:38:45] VERBOSE[29105][C-0000011b] pbx.c: -- Executing [dstring@macro-dial-one:12] Set("SIP/IPComms1-in-0000010d", "DSTRING=PJSIP/701/sip:701@[MY IP ADDY]:52389;rinstance=[STRING THAT LOOKS LIKE A MAC ADDY]&") in new stack
[2015-07-20 18:38:45] VERBOSE[29105][C-0000011b] pbx.c: -- Executing [dstring@macro-dial-one:13] Set("SIP/IPComms1-in-0000010d", "ITER=2") in new stack
[2015-07-20 18:38:45] VERBOSE[29105][C-0000011b] pbx.c: -- Executing [dstring@macro-dial-one:14] GotoIf("SIP/IPComms1-in-0000010d", "0?begin") in new stack
[2015-07-20 18:38:45] VERBOSE[29105][C-0000011b] pbx.c: -- Executing [dstring@macro-dial-one:15] Set("SIP/IPComms1-in-0000010d", "DSTRING=PJSIP/701/sip:701@[MY IP ADDY]:52389;rinstance=[STRING THAT LOOKS LIKE A MAC ADDY]") in new stack
Broken inbound call with inbound route set to Lenny extension:
[2015-07-20 18:06:08] VERBOSE[26606][C-00000118] pbx.c: -- Executing [dstring@macro-dial-one:10] NoOp("SIP/IPComms1-in-0000010a", "Debug: Found PJSIP Destination PJSIP/53669, updaing with PJSIP_DIAL_CONTACTS") in new stack
[2015-07-20 18:06:08] VERBOSE[26606][C-00000118] pbx.c: -- Executing [dstring@macro-dial-one:11] Set("SIP/IPComms1-in-0000010a", "THISDIAL=") in new stack
[2015-07-20 18:06:08] VERBOSE[26606][C-00000118] pbx.c: -- Executing [dstring@macro-dial-one:12] Set("SIP/IPComms1-in-0000010a", "DSTRING=&") in new stack
[2015-07-20 18:06:08] VERBOSE[26606][C-00000118] pbx.c: -- Executing [dstring@macro-dial-one:13] Set("SIP/IPComms1-in-0000010a", "ITER=2") in new stack
[2015-07-20 18:06:08] VERBOSE[26606][C-00000118] pbx.c: -- Executing [dstring@macro-dial-one:14] GotoIf("SIP/IPComms1-in-0000010a", "0?begin") in new stack
[2015-07-20 18:06:08] VERBOSE[26606][C-00000118] pbx.c: -- Executing [dstring@macro-dial-one:15] Set("SIP/IPComms1-in-0000010a", "DSTRING=") in new stack
[2015-07-20 18:06:08] VERBOSE[26606][C-00000118] pbx.c: -- Executing [dstring@macro-dial-one:16] Return("SIP/IPComms1-in-0000010a", "") in new stack
[2015-07-20 18:06:08] VERBOSE[26606][C-00000118] pbx.c: -- Executing [s@macro-dial-one:27] GotoIf("SIP/IPComms1-in-0000010a", "1?nodial") in new stack
[2015-07-20 18:06:08] VERBOSE[26606][C-00000118] pbx.c: -- Goto (macro-dial-one,s,49)
[2015-07-20 18:06:08] VERBOSE[26606][C-00000118] pbx.c: -- Executing [s@macro-dial-one:49] ExecIf("SIP/IPComms1-in-0000010a", "1?Set(DIALSTATUS=NOANSWER)") in new stack
[2015-07-20 18:06:08] VERBOSE[26606][C-00000118] pbx.c: -- Executing [s@macro-dial-one:50] NoOp("SIP/IPComms1-in-0000010a", "Returned from dial-one with nothing to call and DIALSTATUS: NOANSWER") in new stack
Hi Tycho
I have Lenny working on a previous version with unattended transfer I cant find the installer to test on the latest raspberrypi. Could I get a copy of the tgz/zip file, I'd like to get it working myself and then we can compare notes
Thanks..Pete
wget http://pbxinaflash.com/Lenny.tgz
tar zxvf Lenny.tgz
rm Lenny.tgz
Hi Tycho
Ok I found that script on my box though I'm not sure it was the one I used to get mine working. In looking at the script, there are a large number of entries in extensions_custom.conf that you wont have.....
Pete
I'm certainly no expert with PJSIP, but I noticed in your log capture that THISDIAL and DSTRING do not contain the necessary data.
Can you re-run the incoming call again, and show the complete call details leading up to what you have shown in post #158. Are there any other clues that may have been inadvertently snipped off before the call reached that first "Debug:" statement?
Link up your team and customers Phone System Live Chat Video Conferencing
Hosted or Self-managed. Up to 10 users free forever. No credit card. Try risk free.
Check your inbox!
We’ve sent you an email. Click on the button in the email body to verify your email address – (if you can not find it, check your spam folder).
Upon verification you will be directed to the 3CX setup wizard.