ednunnemaker
New Member
- Joined
- Oct 31, 2007
- Messages
- 118
- Reaction score
- 0
can someone post an install guide for t-1's for us newbs, i just cant get it to work, i have now had to reistall the software for this machine 3 times because i'm partially stupid and every time i have had to call digium to set up the card, i took notes last time but they just don 't work, what do i have to do to make these digium te122p installs work. i was told i needed to edit etc/zaptel.conf, which i did, and i needed to edit etc/asterisk/zapata.conf , which i did, but i get an error when the system boots that says:
ZT_SPANCONFIG failed on span 1: Invalid argument (22)
what am i doing wrong and why does is this so hard for me to get working? its supposed to be easy right?
here are my files:
/etc/zaptel.conf
# Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# It must be in the module loading order
# Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER) B8ZS/ESF
span=1,1,0,esf,b8zs
e&m=1-16
# Span 2: WCTDM/0 "Wildcard TDM410P Board 1"
fxoks=25-28
# Global data
loadzone = us
defaultzone = us
/etc/asterisk/zapata.conf
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
context=from-internal
signalling=fxo_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
usecallerid=no
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
;faxdetect=both
;faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include genzaptelconf configs
#include zapata-auto.conf
;Include AMP configs
#include zapata_additional.conf
language=en
context=from-zaptel
signalling=em_w
channel=1-16
ZT_SPANCONFIG failed on span 1: Invalid argument (22)
what am i doing wrong and why does is this so hard for me to get working? its supposed to be easy right?
here are my files:
/etc/zaptel.conf
# Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# It must be in the module loading order
# Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER) B8ZS/ESF
span=1,1,0,esf,b8zs
e&m=1-16
# Span 2: WCTDM/0 "Wildcard TDM410P Board 1"
fxoks=25-28
# Global data
loadzone = us
defaultzone = us
/etc/asterisk/zapata.conf
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
context=from-internal
signalling=fxo_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
usecallerid=no
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
;faxdetect=both
;faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include genzaptelconf configs
#include zapata-auto.conf
;Include AMP configs
#include zapata_additional.conf
language=en
context=from-zaptel
signalling=em_w
channel=1-16