Shadowfire
Member
- Joined
- Mar 19, 2008
- Messages
- 42
- Reaction score
- 1
Hope everyone is doing well. I got both the Piaf3 and Incrediblepbx11 install. My six phone and extensions seem to be working internally. I am able to call in from mobile or external lines. My issue I am having is the outgoing calls - the system tells me "Your call can not be completed as dialed. Please check the number and dial again.".
here is Asterisk CLI when I try to dial out -
[May 26 10:46:34] Connected to Asterisk 11.16.0 currently running on localhost (pid = 1997)
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Executing [8632554436@from-internal:1] ResetCDR("SIP/700-00000002", "") in new stack
-- Executing [8632554436@from-internal:2] NoCDR("SIP/700-00000002", "") in new stack
-- Executing [8632554436@from-internal:3] Progress("SIP/700-00000002", "") in new stack
-- Executing [8632554436@from-internal:4] Wait("SIP/700-00000002", "1") in new stack
> 0xb7305ea8 -- Probation passed - setting RTP source address to 192.168.1.92:11784
-- Executing [8632554436@from-internal:5] Progress("SIP/700-00000002", "") in new stack
-- Executing [8632554436@from-internal:6] Playback("SIP/700-00000002", "silence/1&cannot-complete-as-dialed&check-number-dial-again,noanswer") in new stack
-- <SIP/700-00000002> Playing 'silence/1.gsm' (language 'en')
-- <SIP/700-00000002> Playing 'cannot-complete-as-dialed.gsm' (language 'en')
-- <SIP/700-00000002> Playing 'check-number-dial-again.gsm' (language 'en')
== Spawn extension (from-internal, 8632554436, 6) exited non-zero on 'SIP/700-00000002'
-- Executing [h@from-internal:1] Hangup("SIP/700-00000002", "") in new stack
== Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/700-00000002'
System Info and configs below:
----------------------------------------
CentOS release 6.7 (Final)
PIAF 3.0
IncrediblePBX11
Digium, Inc. Wildcard TDM410 4-port analog card
(6) Yealink - T21 E2 Phones
Using DAHDI Config DID's
Analog Hardware
Type Ports Action
FXO Ports 1,2,3 Edit
FXS Ports 4 Edit
Analog FXO Ports
Port 1 Settings:
Signaling: Kewl Start
Group: 0
Context: from-pstn
Port 2 Settings:
Signaling: Kewl Start
Group: 0
Context: from-pstn
Port 3 Settings:
Signaling: Kewl Start
Group: 0
Context: from-pstn
Using DAHDI Channels
Channel 1 - Description: Main Line 1 / DID: 8636448241
Channel 2 - Description: Main Line 2 / DID: 8636499217
-----------------------------
chan_dahdi.conf
;--------------------------------------------------------------------------------;
; Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ;
; this file must be done via the web gui. There are alternative files to make ;
; custom modifications, details at: http://freepbx.org/configuration_files ;
;--------------------------------------------------------------------------------;
;
[general]
; generated by module
#include chan_dahdi_general.conf
; for user additions not provided by module
#include chan_dahdi_general_custom.conf
[channels]
language=en
busydetect=yes
busycount=10
usecallerid=yes
callwaiting=yes
usecallingpres=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=no
immediate=no
faxdetect=no
rxgain=0.0
txgain=0.0
module_name=wctdm24xxp
opermode_checkbox=0
opermode=USA
alawoverride_checkbox=0
alawoverride=0
fxs_honor_mode_checkbox=0
fxs_honor_mode=0
boostringer_checkbox=0
boostringer=0
lowpower_checkbox=0
lowpower=0
fastringer_checkbox=0
fastringer=0
ringdetect_checkbox=0
ringdetect=0
mwi_checkbox=0
mwi=none
neon_voltage=
neon_offlimit=
echocan_nlp_type=0
echocan_nlp_threshold=
echocan_nlp_max_supp=
; for user additions not provided by module
#include chan_dahdi_channels_custom.conf
; include dahdi groups defined by DAHDI module of FreePBX
#include chan_dahdi_groups.conf
; include dahdi extensions defined in FreePBX
#include chan_dahdi_additional.conf
----------------
chan_dahdi_groups.conf
;--------------------------------------------------------------------------------;
; Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ;
; this file must be done via the web gui. There are alternative files to make ;
; custom modifications, details at: http://freepbx.org/configuration_files ;
;--------------------------------------------------------------------------------;
;
signalling=fxs_ks
context=from-pstn
group=0
channel=>1
signalling=fxs_ks
context=from-pstn
group=0
channel=>2
signalling=fxs_ks
context=from-pstn
group=0
channel=>3
signalling=fxo_ks
context=from-analog
group=0
channel=>4
----------------
dahdi-channels.conf
----------------------------------------------
; Autogenerated by /usr/sbin/dahdi_genconf on Mon May 16 14:06:16 2016
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your manual changes will be LOST.
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
;
; Span 1: WCTDM/0 "Wildcard TDM410P" (MASTER)
;;; line="1 WCTDM/0/0 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 1
callerid=
group=
context=default
;;; line="2 WCTDM/0/1 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 2
callerid=
group=
context=default
;;; line="3 WCTDM/0/2 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 3
callerid=
group=
context=default
;;; line="4 WCTDM/0/3 FXOKS"
signalling=fxo_ks
callerid="Channel 4" <4004>
mailbox=4004
group=5
context=from-internal
channel => 4
callerid=
mailbox=
group=
context=default
---------------
Any help would be appreciated.
Thanks,
-SF-
here is Asterisk CLI when I try to dial out -
[May 26 10:46:34] Connected to Asterisk 11.16.0 currently running on localhost (pid = 1997)
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Executing [8632554436@from-internal:1] ResetCDR("SIP/700-00000002", "") in new stack
-- Executing [8632554436@from-internal:2] NoCDR("SIP/700-00000002", "") in new stack
-- Executing [8632554436@from-internal:3] Progress("SIP/700-00000002", "") in new stack
-- Executing [8632554436@from-internal:4] Wait("SIP/700-00000002", "1") in new stack
> 0xb7305ea8 -- Probation passed - setting RTP source address to 192.168.1.92:11784
-- Executing [8632554436@from-internal:5] Progress("SIP/700-00000002", "") in new stack
-- Executing [8632554436@from-internal:6] Playback("SIP/700-00000002", "silence/1&cannot-complete-as-dialed&check-number-dial-again,noanswer") in new stack
-- <SIP/700-00000002> Playing 'silence/1.gsm' (language 'en')
-- <SIP/700-00000002> Playing 'cannot-complete-as-dialed.gsm' (language 'en')
-- <SIP/700-00000002> Playing 'check-number-dial-again.gsm' (language 'en')
== Spawn extension (from-internal, 8632554436, 6) exited non-zero on 'SIP/700-00000002'
-- Executing [h@from-internal:1] Hangup("SIP/700-00000002", "") in new stack
== Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/700-00000002'
System Info and configs below:
----------------------------------------
PIAF 3.0
IncrediblePBX11
Digium, Inc. Wildcard TDM410 4-port analog card
(6) Yealink - T21 E2 Phones
Using DAHDI Config DID's
Analog Hardware
Type Ports Action
FXO Ports 1,2,3 Edit
FXS Ports 4 Edit
Analog FXO Ports
Port 1 Settings:
Signaling: Kewl Start
Group: 0
Context: from-pstn
Port 2 Settings:
Signaling: Kewl Start
Group: 0
Context: from-pstn
Port 3 Settings:
Signaling: Kewl Start
Group: 0
Context: from-pstn
Using DAHDI Channels
Channel 1 - Description: Main Line 1 / DID: 8636448241
Channel 2 - Description: Main Line 2 / DID: 8636499217
-----------------------------
chan_dahdi.conf
;--------------------------------------------------------------------------------;
; Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ;
; this file must be done via the web gui. There are alternative files to make ;
; custom modifications, details at: http://freepbx.org/configuration_files ;
;--------------------------------------------------------------------------------;
;
[general]
; generated by module
#include chan_dahdi_general.conf
; for user additions not provided by module
#include chan_dahdi_general_custom.conf
[channels]
language=en
busydetect=yes
busycount=10
usecallerid=yes
callwaiting=yes
usecallingpres=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=no
immediate=no
faxdetect=no
rxgain=0.0
txgain=0.0
module_name=wctdm24xxp
opermode_checkbox=0
opermode=USA
alawoverride_checkbox=0
alawoverride=0
fxs_honor_mode_checkbox=0
fxs_honor_mode=0
boostringer_checkbox=0
boostringer=0
lowpower_checkbox=0
lowpower=0
fastringer_checkbox=0
fastringer=0
ringdetect_checkbox=0
ringdetect=0
mwi_checkbox=0
mwi=none
neon_voltage=
neon_offlimit=
echocan_nlp_type=0
echocan_nlp_threshold=
echocan_nlp_max_supp=
; for user additions not provided by module
#include chan_dahdi_channels_custom.conf
; include dahdi groups defined by DAHDI module of FreePBX
#include chan_dahdi_groups.conf
; include dahdi extensions defined in FreePBX
#include chan_dahdi_additional.conf
----------------
chan_dahdi_groups.conf
;--------------------------------------------------------------------------------;
; Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ;
; this file must be done via the web gui. There are alternative files to make ;
; custom modifications, details at: http://freepbx.org/configuration_files ;
;--------------------------------------------------------------------------------;
;
signalling=fxs_ks
context=from-pstn
group=0
channel=>1
signalling=fxs_ks
context=from-pstn
group=0
channel=>2
signalling=fxs_ks
context=from-pstn
group=0
channel=>3
signalling=fxo_ks
context=from-analog
group=0
channel=>4
----------------
dahdi-channels.conf
----------------------------------------------
; Autogenerated by /usr/sbin/dahdi_genconf on Mon May 16 14:06:16 2016
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your manual changes will be LOST.
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
;
; Span 1: WCTDM/0 "Wildcard TDM410P" (MASTER)
;;; line="1 WCTDM/0/0 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 1
callerid=
group=
context=default
;;; line="2 WCTDM/0/1 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 2
callerid=
group=
context=default
;;; line="3 WCTDM/0/2 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 3
callerid=
group=
context=default
;;; line="4 WCTDM/0/3 FXOKS"
signalling=fxo_ks
callerid="Channel 4" <4004>
mailbox=4004
group=5
context=from-internal
channel => 4
callerid=
mailbox=
group=
context=default
---------------
Any help would be appreciated.
Thanks,
-SF-
Last edited: