CID Superfecta not working

Joined
Mar 31, 2008
Messages
217
Reaction score
1
This is not in the same order as the debug information you posted above. In order to help I need a complete and consistent picture of what is going on. I also need you to disable the sources one by one as I instructed so we can narrow down the issue to the root cause.
 

foneman

Guru
Joined
Oct 24, 2007
Messages
297
Reaction score
1
Found

I saw that in the sources there was listed Astridex then 2 lines down was Asteridex. The first is what gave the notice of
result
scrollup.gif
took 0.0003 seconds. with no source listed. I removed and will test now....
 

foneman

Guru
Joined
Oct 24, 2007
Messages
297
Reaction score
1
New CLI

I set to only check Asterisk Phonebook which is the only result that showed my name on the debug and here is the CLI
Connected to Asterisk 1.4.21.2 currently running on tncomm (pid = 3216)
Verbosity is at least 8
-- Starting simple switch on 'Zap/1-1'
-- Executing [s@from-zaptel:1] NoOp("Zap/1-1", "Entering from-zaptel with DID == ") in new stack
-- Executing [s@from-zaptel:2] Ringing("Zap/1-1", "") in new stack
-- Executing [s@from-zaptel:3] Set("Zap/1-1", "DID=s") in new stack
-- Executing [s@from-zaptel:4] NoOp("Zap/1-1", "DID is now s") in new stack
-- Executing [s@from-zaptel:5] GotoIf("Zap/1-1", "1?zapok:notzap") in new stack
-- Goto (from-zaptel,s,8)
-- Executing [s@from-zaptel:8] NoOp("Zap/1-1", "Is a Zaptel Channel") in new stack
-- Executing [s@from-zaptel:9] Set("Zap/1-1", "CHAN=1-1") in new stack
-- Executing [s@from-zaptel:10] Set("Zap/1-1", "CHAN=1") in new stack
-- Executing [s@from-zaptel:11] Macro("Zap/1-1", "from-zaptel-1|s|1") in new stack
-- Executing [s@macro-from-zaptel-1:1] NoOp("Zap/1-1", "Entering macro-from-zaptel-1 with DID = s and setting to: 6156908650") in new stack
-- Executing [s@macro-from-zaptel-1:2] Set("Zap/1-1", "__FROM_DID=6156908650") in new stack
-- Executing [s@macro-from-zaptel-1:3] Goto("Zap/1-1", "from-trunk|6156908650|1") in new stack
-- Goto (from-trunk,6156908650,1)
== Channel 'Zap/1-1' jumping out of macro 'from-zaptel-1'
-- Executing [6156908650@from-trunk:1] Set("Zap/1-1", "__FROM_DID=6156908650") in new stack
-- Executing [6156908650@from-trunk:2] Gosub("Zap/1-1", "cidlookup|cidlookup_3|1") in new stack
-- Executing [cidlookup_3@cidlookup:1] Set("Zap/1-1", "CALLERID(name)=") in new stack
-- Executing [cidlookup_3@cidlookup:2] Return("Zap/1-1", "") in new stack
-- Executing [6156908650@from-trunk:3] Gosub("Zap/1-1", "app-blacklist-check|s|1") in new stack
-- Executing [s@app-blacklist-check:1] LookupBlacklist("Zap/1-1", "") in new stack
-- Executing [s@app-blacklist-check:2] GotoIf("Zap/1-1", "0?blacklisted") in new stack
-- Executing [s@app-blacklist-check:3] Return("Zap/1-1", "") in new stack
-- Executing [6156908650@from-trunk:4] ExecIf("Zap/1-1", "1 |Set|CALLERID(name)=615xxxxxxx") in new stack
-- Executing [6156908650@from-trunk:5] SetMusicOnHold("Zap/1-1", "Trial") in new stack
-- Executing [6156908650@from-trunk:6] Set("Zap/1-1", "__MOHCLASS=Trial") in new stack
-- Executing [6156908650@from-trunk:7] Set("Zap/1-1", "FAX_RX=1100") in new stack
-- Executing [6156908650@from-trunk:8] Set("Zap/1-1", "[email protected]") in new stack
-- Executing [6156908650@from-trunk:9] Answer("Zap/1-1", "") in new stack
-- Executing [6156908650@from-trunk:10] Wait("Zap/1-1", "3") in new stack
-- Executing [6156908650@from-trunk:11] Set("Zap/1-1", "__CALLINGPRES_SV=allowed_not_screened") in new stack
-- Executing [6156908650@from-trunk:12] SetCallerPres("Zap/1-1", "allowed_not_screened") in new stack
-- Executing [6156908650@from-trunk:13] Set("Zap/1-1", "__ALERT_INFO=info=<Bellcore-dr4>") in new stack
-- Executing [6156908650@from-trunk:14] Goto("Zap/1-1", "app-daynight|0|1") in new stack

It is showing that it is setting the name as the phone number.
 

Members online

No members online now.

Forum statistics

Threads
25,782
Messages
167,509
Members
19,202
Latest member
pbxnewguy
Get 3CX - Absolutely Free!

Link up your team and customers Phone System Live Chat Video Conferencing

Hosted or Self-managed. Up to 10 users free forever. No credit card. Try risk free.

3CX
A 3CX Account with that email already exists. You will be redirected to the Customer Portal to sign in or reset your password if you've forgotten it.
Top