Search results

Had an all calls coming into the IVR and a single number with an incoming route. No joy on either.

Changed the port in Skyetel to match the port in Settings > Asterisk SIP Settings > SIP Settings [chan_pjsip} to match and life is good! Truly want to thank you @kenn10 - that was it!

Decided to build out a new 5 Minute Wonder on Crown Cloud - install went super smooth, until I wanted to receive an inbound call. Keep getting the "number not in service message". In the asterisk log I see this: Connected to Asterisk 18.11.1 currently running on vps (pid = 2636) == Using...

Burned everything down to the ground and built it from scratch (originally used the VMware.ova image). Restored the backup and it worked. A bit later, I did notice that It's Lenny 3rd Party module wasn't in the drop down. When I tried calling 53669# it wouldn't complete the call. The Custom...

I currently have an iPBX running on Proxmox VM and want to move it to vCenter 7. Here are the steps I took: Built a new host in VMware. Made a backup of the original iPBX, copied the backup off, shut it down. Re-IP'd the new box to match the old box. Restored the backup on the new VM. The...

Made the mistake of buying another cheap Aastra 6757i phone to add to the house (I've already got 2 of these - they're quite sturdy, and the new one makes 3). The new phone was already configured for someone else's PBX, so had to factory reset it. Found out that I don't have firmware for it...

Just for posterity or in case anyone is curious to see how I set up my IncrediblePBX 2020 server to use gmail.com with authentication using smtp.gmail.com as a relay host: 1. You must have a gmail.com account. If you don't have one, create one. 2. Log into your gmail.com account and enable...

Resolved the issue by: 1. Removing sendmail and replacing it with postfix 2. Configuring postfix to use gmail (via one of my gmail accounts). FWIW - After several days, I could never get comcast to accept mail. Once I removed sendmail and replaced it with postfix, I was up and running within a...

I've been trying over the past few days to set up email on the PBX server with the Comcrap and Sendmail combination and I'm not seeing any joy. I followed the tutorial here: Reconfiguring SendMail for a SmartHost but am seeing all mail Here is a snippet of the logs: pr 21 16:10:30 pbx...

Thanks @tbrummell - the second document is the one that did it! I went out and deleted the rules/NAT that I had in my firewall and recreated them using that document. Looks like I was on the right track, but was too restrictive and was NAT-ing to the wrong interface. ORIGINAL: Firewall Rules...

The server is local as are the SIP phones.

Yes, I do have the NAT Port Forward rules in place as well - forgot to mention that. I added it to my original post. I'm using Skyetel - and from their end, everything looks good - the Endpoint Health is all green. Tried that and still no joy - here is the screen shot of that: -Rick

Hello all! Built a new (local - not in the cloud) Incredible PBX (on CentOS 7) server so I could follow the latest article (The Big 30) - but I have run into a bit of a problem that I cannot get resolved - and I'm completely sure I'm missing something, but unable to figure it out. I have a...

TL; DR - Check the CLI to verify the format of incoming DID calls before adding them. @wardmundy was right! Ok - So I solved this too, but my solution was initially different from what is listed above. I noticed that when the call comes in from Skyetel, it is prepended with a plus "+" sign...

That's kinda what I was thinking about doing on this box too, but want to poke around with it just a little longer before I spent a couple of hours rebuilding it...

I did - went back and double checked my work... So the call makes it in, but the PBX doesn't quite know what to do with it - it reports that the number I've dialed isn't in service amd terminates the call, regardless which destination I send it to... I deleted the inbound route and re-created...

I'm running into this exact problem - has anyone else seen this issue or have a clue as to where to start? Here is the output from asterisk when the call comes in: == Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 > 0x7f0ce807edb0 -- Strict RTP learning after remote address...

Looks like Lenny still has some life left in him! https://motherboard.vice.com/en_us/article/d3b7na/the-story-of-lenny-the-internets-favorite-telemarketing-troll There is also a link to the 16 voice responses (downloadable from soundcloud).

Will do! Thank you, sir! :)

@lrosenman - I bought an Intel NUC NUC5CPYH yesterday to build out a Xivo when I stumbled upon your post. Just curious to see how the NUC has been for you? Anything you'd change so far?