Search results

  1. Alex728

    Dial Tone Time Out

    That was going to be my second suggestion (as its also a tactic I've used on other PAP2Ts) - though I did try both and found in my case it was the dial tone length. That said, my Regional settings are obviously going to be a lot different from many users - and I think I instinctively change...
  2. Alex728

    Dial Tone Time Out

    in regional settings change the length of the dial tone(s) to your desired length. The first entry is your normal dial tone, the second one is for when you press R (Recall) or "hook flash" as you chaps in the USA call it. For instance this one below is 10 seconds long...
  3. Alex728

    upgrading from 1.4 with Zaptel?

    the confusion with #include and the automatically generated channel file not being included existed on zaptel as well as dahdi. what has happened this side of the pond is a further separate issue - the zaptel/dadhi change muddies the water a bit but it is a big reason why people in the UK do...
  4. Alex728

    upgrading from 1.4 with Zaptel?

    Thanks for the info - there are a couple of spare machines one of which is set up so it can be used as a backup PABX for any location... Will 1.8.5.0 talk to older versions via IAX2? (I vaguely recall that some setting about "requirecalltoken=no" has to be changed) -perhaps some other things...
  5. Alex728

    upgrading from 1.4 with Zaptel?

    How easy is it to do this? Because of a showstopper fault with Asterisk 1.6, DAHDI and UK telephone lines which persisted for a whole year before it was eventually addressed I never have used DADHI on any of our production systems... but I get the impression that like it or not we are being...
  6. Alex728

    Telephone Improvements coming --

    loads of people do across the world.. https://www.ckts.info/
  7. Alex728

    Telephone Improvements coming --

    not sure about the dropwire (this gets replaced over the years) but in the village I work in there is a telephone pole which is marked "GPO 55" which means it dates back from 1955 - like most European nations the telephone company was originally nationalised and part of the General Post Office..
  8. Alex728

    Telephone Improvements coming --

    I've got a British Post Office Type 746 telephone made in 1972 (year of my birth) connected to my home PIAF via a PAP2T :D
  9. Alex728

    New Kennonsoft UI Update Fix for ALL Browsers

    all good so far, other than typo in the above, there is a extra "-" and the wget statement should be wget http://pbxinaflash.com/new-ui.tgz
  10. Alex728

    Tip : altering inbound caller ID...

    just realised that I missed (by a year!) rrr's later reply as May becomes a busy time for me at work, but in hindsight what I would have done (and perhaps rrr might have done) is altered the code so if box a is in the UK all received caller ID is converted to international format such as...
  11. Alex728

    CID Number Prefix - Help...

    I've used this to add prefixes to caller ID coming in on custom contexts or with certain DID numbers... http://pbxinaflash.com/community/threads/tip-altering-inbound-caller-id.2530/?t=2530
  12. Alex728

    Problem with Feature Codes

    it seems to be getting a clear (disconnect) signal from the CISCO. I'd check the settings of this device first, but if you still can't get anything to work and you haven't got a lot of extensions , TBH I'd copy the important files (voicemails, CDR etc) to another PC using WinSCP and then...
  13. Alex728

    Problem with Feature Codes

    I haven't worked much with older CISCOs but newer ones / Linksys sets have an internal dial plan. Check (by watching the Asterisk CLI_ that this hasn't got hosed up somehow and isn't clipping the feature code / adding numbers to it so something other than *97 is being dialled. This is what you...
  14. Alex728

    swap memory...

    I've never seen swap file even get touched on all the PIAF boxes I've set up since 2007... Is there any particular reason you need purple or are you just experimenting? I assume this is your home box or a test one and not the one you are using for work :eek: I would also post the exact status...
  15. Alex728

    Dahdi - Trunk no audio on out bound

    happy to help - I found this out the hard way a while back. Even if your line does gives polarity rev on answer (usually businesslines and featurelines) settring this option makes things go pearshaped. And you can get different protocols from different lines connected to the same Telephone...
  16. Alex728

    Dahdi - Trunk no audio on out bound

    Try removing this and see what happens..
  17. Alex728

    TDM400P No outgoing audio (FXO)

    I don't know how things roll in Dallas but here in England telephone lines in some areas have a polarity reversal when the phone is answered at the distant end on a outbound call. The Telephone Exchange where I work (in a village out in the countryside) definitely does this, I checked it on my...
  18. Alex728

    PAP2T delay before dialing

    Another caveat is normally FreePBX is set up to use escape digit "9" to get an outside line. The standard "out of the box" PAP2T dial plan is clearly intended for a home user in the USA/Canada dial plan (I think its called NANP and is common to both USA and Canada) where no escape digit is...
  19. Alex728

    TIPS Spa500s

    Mine worked out of the box, I didn't have to add the sip_custom.conf lines... maybe the FreePBX lot have already put them in at some point? One tip I would add for call pickups is that from some of the how-tos I have seen, many systems appear to be configured to just pick up whatever extension...
  20. Alex728

    Dahdi - Trunk no audio on out bound

    this is really strange as womble is apparently getting perfect two way audio on inbound but not on outbound @womble - Is there any particular reason/feature you / your business need to use the "latest and greatest" version of Asterisk/DAHDI? I'm still using the Asterisk 1.4/Zaptel versions...
Get 3CX - Absolutely Free!

Link up your team and customers Phone System Live Chat Video Conferencing

Hosted or Self-managed. Up to 10 users free forever. No credit card. Try risk free.

3CX
A 3CX Account with that email already exists. You will be redirected to the Customer Portal to sign in or reset your password if you've forgotten it.
Top