Search results

  1. Rrrr

    SOLVED Anveo Direct with Incredible PBX

    Great post which helped me a lot. The list of IPs in the match list contained a typo for 169.48.232.158 (see here), or more likely, may have changed over time. See follow-up here.
  2. Rrrr

    TIPS Anveo oddities

    Here's a list of all possible Anveo IPs I received 6.2020, although not all are active at the same time. *) The list can be changed when they add new geo locations. All IPs...
  3. Rrrr

    TIPS Anveo oddities

    Thank you for letting me know. I use the Anveo Direct service too, mainly outbound, and set the SIP server as sbc.anveo.com in the PJSIP trunk. I tested with an incoming DID too and it works, even without the IP addresses in the Match line. I am curious: if sbc.anveo.com resolves correctly, why...
  4. Rrrr

    TIPS Anveo oddities

    Thank you. Incoming calls also work with Support Path=No. What is the significance of setting Support Path=Yes? (as per, I have Authentication: Outbound Registration: None )
  5. Rrrr

    TIPS Anveo oddities

    Thank you for your quick reply. It indeed works with IP addresses in the match line. I will need to add any future IP addresses as they come. Thanks
  6. Rrrr

    TIPS Anveo oddities

    @jreming Can you share a PJSIP setup for Anveo Retail as well? Like Anveo Direct, Anveo Retail seems to circulate their servers over a number of IPs. Anveo has proxies in Germany (de), Canada (ca) and Asia-Pac (ap). I've tried your suggestion for Anveo Direct in the below, but it did not work...
  7. Rrrr

    SOLVED No CLI output after updating through Module Admin

    Thank you. 1. I rolled back to an image after the install completed and logged back in: the three modules were not updated by the automatic update utility. 2. Running Ward's code from the Linux CLI I updated the modules (much easier!), but, like the GUI update, caused the asterisk CLI to...
  8. Rrrr

    SOLVED No CLI output after updating through Module Admin

    PBX2020.1 fresh install CentOs 7 16.12.0 iPBX 15.0.12.17 I see a few other threads with issues using Module Admin: here and here. This seems different: I just want to warn people not to use Module Admin. With a fresh install, I updated three vulnerable modules and applied settings. After that...
  9. Rrrr

    NO JOY GUI: Sound languages showing only those installed, cannot add

    PBX2020.1 fresh install CentOs 7 16.12.0 iPBX 15.0.12.17 I installed a few languages through the GUI from the long list of available languages. Now, when I go back to Admin/Sound Languages, I see only those installed and cannot select more. I've checked on a difference browser with the same...
  10. Rrrr

    TIPS Change from UDP to TCP

    I know ... its an old thread. Here's how I solved "Device not configured to use this transport type" with SNOM D785. (In addition to post #8 above and here #8) On the SNOM device: 1. In Advanced Settings, tab SIP/RTP: set Listen on SIP TCP Port to On (info) 2. In the user account (identity)...
  11. Rrrr

    Black Friday / Cyber Monday

    Question: the CLI shows every line twice, what am I doing wrong? I've never had this, but this week in fresh installs of both 16-15 and 2020.
  12. Rrrr

    TIPS Locked out installing incredible PBX 2020 on DO

    It's the second time today I came back after a cup of coffee during phase I and found myself locked out After the reboot during phase I, I cannot get back in with SSH. I still have access through the web console of DO, so I know the server re-booted and is running. Here's what I did: 1...
  13. Rrrr

    PIONEERS Custom IBM Voice Prompts for Asterisk and 3CX

    Update: I managed to install mp3 and make ibmprompt.php work. Here is what made it work (replace this line with the original line above): yum -y install libmad libmad-devel libid3tag libid3tag-devel lame lame-devel flac-devel --skip-broken
  14. Rrrr

    PIONEERS Custom IBM Voice Prompts for Asterisk and 3CX

    @randy7376 Thanks, I am not sure how. Here's what I did: $ yum list installed | grep libsox* libsoup.x86_64 2.34.3-5.el6 @base libsoup-devel.x86_64 2.34.3-5.el6 @base $ yum list installed | grep libsox-fmt-mp3 $ yum...
  15. Rrrr

    PIONEERS Custom IBM Voice Prompts for Asterisk and 3CX

    The script says "sox FAIL formats: no handler for file extension `mp3'" and file voiceprompt.wav does not exist. I am aware the article above is probably outdated but I did not find instructions to just install IBM Watson TTS on an existing incredible pbx platform without enchilada. Current...
  16. Rrrr

    PIONEERS NEW Incredible 13-13.10 Installers

    Using Gmail as a SmartHost for SendMail I wanted to share the following: 1. Typo: tail /var/log/maillog instead of tail /var/log/mail.log in your instruction; 2. My sendmail was extremely slow and held up the call flow: Here is what I discovered in my log: I resolved it by adding hostname...
  17. Rrrr

    TIPS How to use tonezone in dialplan

    I just installed pbxinaflash LEAN on CentOS 6 and was hoping I could now use the new tonezone solution. Unfortunately, one year later and we are not in core 14 yet. I tried the instructions provided by Andrew Nagy here, but it looks like pbxinaflash does not allow me to get the edge core...
  18. Rrrr

    PIONEERS NEW Incredible 13-13.10 Installers

    The confusing part is this article (amoungst others), but its from 2010. Did the definition change in recent versions?
  19. Rrrr

    PIONEERS NEW Incredible 13-13.10 Installers

    @ward srvlookup=yes allowguest=yes Is there a reason they are set by default? Especially allowguest is (for me) a complicated variable that has many consequences I may not fully grasp. Note I have no intention to allow incoming SIP calls from anything but trusted SIP providers.
Get 3CX - Absolutely Free!

Link up your team and customers Phone System Live Chat Video Conferencing

Hosted or Self-managed. Up to 10 users free forever. No credit card. Try risk free.

3CX
A 3CX Account with that email already exists. You will be redirected to the Customer Portal to sign in or reset your password if you've forgotten it.
Top