Search results

  1. M

    Install PIAF from USB Flash Drive

    Bmore, I have followed you latest instruction and I am now getting the piaf installation splash screen (wich for some reason identify itself has being version 1.7.5.5.4) and being prompted for password timezone and keyboard. The CentOS installation was pretty smooth and I am now at the piaf...
  2. M

    Install PIAF from USB Flash Drive

    Bingo! You had it right Ward! I'm in now! Just for reference, as you can see from my posts, the installation took roughly 1 hour on my Acer Veriton VN282G-ED525L. Not bad! I just need finish the pbx configuration now. Thanks!
  3. M

    Install PIAF from USB Flash Drive

    Thanks for the input Ward! I will try that as soon as my piaf scripting magic is completed.
  4. M

    Install PIAF from USB Flash Drive

    I have rebooted on the USB stick I had created yesterday and I confirm that First, I dont get the initial piaf red warning installation screen and second, i'm never prompted for any input... It goes directly in formating of the drive and the centos installation! What am I doing...
  5. M

    Install PIAF from USB Flash Drive

    I had no problem with a 16Gb Corsair GT and a 4Gb Kingston 102.
  6. M

    Install PIAF from USB Flash Drive

    Thanks for Sharing all that work! I have been strugling with the piaf installation on my new acer veriton for a week now! I'm realy suprised how we still depend on harcheic optical drives... I have folowed your direction last night and it worked like a charm! But even though it was late and I...
  7. M

    Aastra MBU 400 SIP IP DECT?

    This is the impression I had about the aastra. I would love to buy the 57i, but I cant justify the cost to myself and most likely to my wife... If the MBU 400 is as good and piaf friendly as the 57i wireless handset, this will be my choice. But I'm suprise that I cant find any info about the...
  8. M

    Aastra MBU 400 SIP IP DECT?

    Thanks for the info!
  9. M

    Aastra MBU 400 SIP IP DECT?

    I'm looking for a wireless handset and I also need to replace my Digium TDM400... I hate going back to analog, but I'm stuck with an Internet/voip that enforce the use of their ATA (similar to Vonage). I was considering the SNOM M3 and the SPA3102 until i notice the MBU 400. Anyone has used...
  10. M

    Caller ID unavailable

    Yep! I did try that. No luck. Thanks! I will try a new installation of piaf 1.2 over the weekend. If this doesnt work, my next step would be to replace the FXO module, but I wont do so since we will be getting a Fiber To the Home with Voip package in a few month. That will resolve the PSTN...
  11. M

    Caller ID unavailable

    No one has a clue for me? I'm sure i'm not the only one having this issue (I hope) Thanks
  12. M

    Caller ID unavailable

    Thanks for the quick reply Bart. I don’t know if I got that right, because I don’t ear any ring or modem tones from the SIP phore or the phone hoock up to the ZAP channel wich my incoming route destination. My channel 1 is my FXO and channel 2-3 are home phone. I also have a SIP phone in the...
  13. M

    Caller ID unavailable

    40$ donation to PIAF if I can get this CallerID working Yeah… I’m still stuck with this problem… :banghead: although; I have found what is causing the problem: Zaptel-FXO is answering the call as soon as its comes in. This doesn’t give enough time to get the CallerID information. I need at...
  14. M

    Caller ID unavailable

    still no solution... I am still experiencing this problem. I cant figure out what is causing the callerid information not going through the FXO module. Am I the only one experiencing this problem? :confused: Any help is apreciated Mashman
  15. M

    Caller ID unavailable

    Ohh... That is unfortunate... Thanks anyway Titanous. This is strange. I did not had this issue with my plain old setup which was Debian with pure asterisk 1.2. I had built it while reading the Asterisk TFOT book. I really like the FreePBX features and I hope I will be able to get my...
  16. M

    Caller ID unavailable

    Thanks for your reply Jroper. Following my googling search, I couldn’t find any opermode setting for North America (I’m located in Canada). Although by default, it is setup for North America and one way to verify that, is to look in /var/log/messages. Instead of identifying your region, it...
  17. M

    Caller ID unavailable

    The Caller ID information is not passing through the ZAP trunk (TDM400) from incomming PSTN call. Any idea what can cause this?
  18. M

    SOLVED TDM400P - FXS no dial tone

    Resolved! Yeah! The issue is resolved! Thanks :)
  19. M

    SOLVED TDM400P - FXS no dial tone

    Bingo! it work! But when I do a reboot, I get the same problem untill I execute the zaptel and amportal restart. Is there a way to resolve this issue? I have tried to do a genzaptelconf again, but it does the same thing... need to do a restart on zaptel after the reeboot :confused: Thanks!
  20. M

    SOLVED TDM400P - FXS no dial tone

    Yes the power is pluged into the card. I have green lights for the first 3 modules. when the phone is off-hoock and dial a number, I get a tone when I press any digits. thanks
Get 3CX - Absolutely Free!

Link up your team and customers Phone System Live Chat Video Conferencing

Hosted or Self-managed. Up to 10 users free forever. No credit card. Try risk free.

3CX
A 3CX Account with that email already exists. You will be redirected to the Customer Portal to sign in or reset your password if you've forgotten it.
Top