Search results

With SPA5xx series phones, there appears to be an incorrect value being set for background logos. Endpoint Manager sets this: <Select_Background_Picture ua="ro">Download BMP Picture</Select_Background_Picture> Dumping the phone config I see this: <Select_Background_Picture...

Oh... Would that be suitable for what I was asking just above? If so, I'm interested in testing, and also apparently need to learn to read :lol:

I don't know if this is a stupid question or not, but anyway... All my phones need mostly the same settings. Dial plan, logos, etc will all be the same. But I would like to vary the unused line keys per phone so I can have BLFs and speed dials relevant to the location/user. What's the best way...

OK, I've factory reset the Snom M3 and grabbed a stack of info on it's default boot behaviour. This is for an Australian model, but I doubt that matters as far as booting. It requests DHCP option 66 and 160 by default. I'm giving it "t*f*t*p://192.168.1.43" on option 160. I never got option 66 to...

I know. It's like an idiot came up with it while drunk. But on the up side, it does ignore lines it doesn't understand from what it says in the logs, and it doesn't seem to care if it gets one line or 100. I'm not 100% - I think I'd actually forced it to try a specific server and filename (via...

Yeah - no worries. I figured you had to build them individually. Just wasn't sure if it was a quick temp thing or if you misread some specs somewhere (since the SPA301 would need exactly what you made - maybe you could relabel it :lol:).

Here's a Snom M3 config file dumped from a working phone, in case it helps with getting it supported correctly... Most lines seem to be pretty self-explanatory. The ones that aren't are probably related to the fact it's a multi-handset DECT cordless system. I was going to try and turn it into a...

I've got a cheap PCIe 4 port dahdi compatible PSTN card, which is working fine, apart from a delay problem on FXO ports. It's connected to a Telstra line in Australia, if that helps/matters. Inbound calls delay 2 rings (~6 seconds). I'm assuming this could be CID detection - there's no CID on...

This server is behind a firewall, but having had servers hacked before, I get a bit paranoid about excess baggage (so to speak). This server is a new install, so not much to lose. It's a home system, so not many people to complain at me. If it breaks updates later, I doubt I'll worry too much...

Which is why I asked if it is SAFE to remove these things. Because excess packages are always a security issue, aswell as a maintenance issue. I have to keep an eye on far more stuff. And if I don't, there's far more chance of bad stuff happening. But if I don't use it, will removing it...

So if I can post a dump from the phone, that would help? I haven't had a proper look yet, but it seems to be similar to XML, but with percentage signs everywhere instead of the <> signs. 50x and 30x do appear to be the same firmware, yes. I just found the download for the 504G and found it...

First things first - I'm a fairly confident Linux user, but new to PIAF. I know PIAF uses a bunch of scripts which may expect certain things... Which brings me to the question: What packages can be safely removed from a fairly bog standard PIAF install? Some of the things I'm thinking of...

That header file is already present at that location, and the source path suggested to copy it from isn't there. Oh well. I guess I'll go back to the clunky but working fully virtualised install. It'll require attention after every reboot (as far as I've been able to work out) and it causes...

So I've now run into another problem - asterisk on the OpenVZ template doesn't have dahdi support compiled in. Looks like if I want to continue trying to use a VZ container, I'm going to have to go it alone anyway. This is kind of why I'd like to know if there's any reason for it to not work -...

Has anyone done this? OpenVZ + a line card that is... What I've done so far is: * Installed and loaded the dahdi kernel modules (only - no tools) on the Proxmox host. * Built a VZ container using the PIAF template. * Told VZ to pass through all the devices in /dev/dahdi * Checked the devices...

Just a couple of comments/queries (from a bit of a n00b): 1) Snom M3 seems to output configs in the wrong format and location. Has anyone got a Snom M3 working with this? Am I just doing it wrong? 2) I have a batch of SPA303 handsets. These seem to accept SPA504G configs made in the endpoint...