QUESTION VVX400 Intercom

[jarrod1024]

Hey I was wondering if anyone has gotten intercom working on the Polycom VVX400?
I followed the instructions in this thread http://pbxinaflash.com/community/index.php?threads/alertinfo-and-paging-issue.12233/ for some ip301s which worked great but the vvx400 config files appear to be different.

 

[jarrod1024]

I did find this http://www.excaliburtech.net/archives/263 , does anyone know if this can be installed alonside the OSS endpoint manager? I also had found a site where someone had said you can use the vvx1500 template in OSS endpoint manager on the VVX 400s as they all run the same software, is this true?

 

[jarrod1024]

Turns out it was the freepbx forums that i saw the thing about using the VVX 1500 config files.

 

[jarrod1024]

Well I ended up using the vvx500 template In the OSS endpoint manager and making the changes in this thread http://pbxinaflash.com/community/index.php?threads/alertinfo-and-paging-issue.12233 and it works now if anyone else is trying to get this working.

 

[EndeavorPBX]

This is what I use on my VVX300:

<!--
Enables auto answer for Intercom Calls on Asterisk
Change ringAutoAnswer to autoAnswer for shorter beep
-->
<voIpProt.SIP.alertInfo
voIpProt.SIP.alertInfo.18.class="ringAutoAnswer"
voIpProt.SIP.alertInfo.18.value="Auto Answer"
>
</voIpProt.SIP.alertInfo>

<se.rt.ringAutoAnswer
se.rt.ringAutoAnswer.callWait="callWaiting"
se.rt.ringAutoAnswer.micMute="0"
se.rt.ringAutoAnswer.name="Ring Answer"
se.rt.ringAutoAnswer.ringer="ringer2"
se.rt.ringAutoAnswer.timeout="500"
se.rt.ringAutoAnswer.type="ring-answer"
>
</se.rt.ringAutoAnswer>

<se.rt.autoAnswer
se.rt.autoAnswer.callWait="ringer2"
se.rt.autoAnswer.micMute="0"
se.rt.autoAnswer.name="Auto Answer"
se.rt.autoAnswer.ringer="ringer2"
se.rt.autoAnswer.timeout="2000"
se.rt.autoAnswer.type="answer"
>

</se.rt.autoAnswer>