LesD
Member
- Joined
- Nov 8, 2009
- Messages
- 408
- Reaction score
- 15
I have a Panasonic KX-TDA30 switchboard which I will phase out once the PIAF system is fully functional. For the moment I have connected the 3 analogue line ports on the TDA30 to 3 OpenVox FXS ports.
Incoming calls are fine. However, outgoing calls from the Panasonic system phones are failing as the numbers sent seem to get corrupted.
Plugging a simple POTS phone into an PXS port works fine for outgoing calls, but the CDR is showing various corruptions of the number coming from the Panasonic phones.
Some examples: Each pair shows what was dialled and what the CDR shows:
902088027xxx
90208807xxx
902012345678
9020145678
9020xx095033
900xx0950
9020xx095033
9020xx0950
The errors are reasonably consistent but not absolutely so.
Any ideas as to where I go from here?
(I had an idea to try pulse dialling - can the OpenVox module deal with that?)
Incoming calls are fine. However, outgoing calls from the Panasonic system phones are failing as the numbers sent seem to get corrupted.
Plugging a simple POTS phone into an PXS port works fine for outgoing calls, but the CDR is showing various corruptions of the number coming from the Panasonic phones.
Some examples: Each pair shows what was dialled and what the CDR shows:
902088027xxx
90208807xxx
902012345678
9020145678
9020xx095033
900xx0950
9020xx095033
9020xx0950
The errors are reasonably consistent but not absolutely so.
Any ideas as to where I go from here?
(I had an idea to try pulse dialling - can the OpenVox module deal with that?)