SOLVED Obivoice Outgoing All Circuits Busy

[kevin922]

Running asterisk 1.8.7.2 with FreePBX, google voice and a few other trunks...

have added obi voice per Ward's instructions, incoming calls work.. outgoing give all circuits busy... i'm sure it is something small but i can't figure it out.

host=sms.intelafone.com
fromdomain=sms.intelafone.com
username=xxxx
secret=xxxxxxx
type=peer
disallow=all
allow=ulaw
insecure=port,invite
port=5060

reg string:
xxxx:[email protected]:5060/mydidnumb

i verified on the obi portal that it shows my device is registered

log:

Executing [981xxxxxxxxxx@from-internal:1] Macro("SIP/1002-00005e18", "user-callerid,LIMIT,") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/1002-00005e18", "AMPUSER=1002") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/1002-00005e18", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/1002-00005e18", "1?Set(REALCALLERIDNUM=1002)") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/1002-00005e18", "AMPUSER=1002") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/1002-00005e18", "AMPUSERCIDNAME=Kevin iPhone") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/1002-00005e18", "0?report") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/1002-00005e18", "AMPUSERCID=703") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/1002-00005e18", "CALLERID(all)="Kevin iPhone" <703>") in new stack
-- Executing [s@macro-user-callerid:9] GotoIf("SIP/1002-00005e18", "0?limit") in new stack
-- Executing [s@macro-user-callerid:10] ExecIf("SIP/1002-00005e18", "1?Set(GROUP(concurrency_limit)=1002)") in new stack
-- Executing [s@macro-user-callerid:11] ExecIf("SIP/1002-00005e18", "1?Set(CHANNEL(language)=en)") in new stack
-- Executing [s@macro-user-callerid:12] GotoIf("SIP/1002-00005e18", "1?continue") in new stack
-- Goto (macro-user-callerid,s,25)
-- Executing [s@macro-user-callerid:25] Set("SIP/1002-00005e18", "CALLERID(number)=703") in new stack
-- Executing [s@macro-user-callerid:26] Set("SIP/1002-00005e18", "CALLERID(name)=Kevin iPhone") in new stack
-- Executing [s@macro-user-callerid:27] Set("SIP/1002-00005e18", "CHANNEL(language)=en") in new stack
-- Executing [981xxxxxxxxxx@from-internal:2] Set("SIP/1002-00005e18", "MOHCLASS=default") in new stack
-- Executing [981xxxxxxxxxx@from-internal:3] Set("SIP/1002-00005e18", "_NODEST=") in new stack
-- Executing [981xxxxxxxxxx@from-internal:4] Macro("SIP/1002-00005e18", "record-enable,1002,OUT,") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/1002-00005e18", "1?check") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] ExecIf("SIP/1002-00005e18", "0?MacroExit()") in new stack
-- Executing [s@macro-record-enable:5] GotoIf("SIP/1002-00005e18", "0?Group:OUT") in new stack
-- Goto (macro-record-enable,s,14)
-- Executing [s@macro-record-enable:14] GotoIf("SIP/1002-00005e18", "0?IN") in new stack
-- Executing [s@macro-record-enable:15] ExecIf("SIP/1002-00005e18", "0?MacroExit()") in new stack
-- Executing [s@macro-record-enable:16] Set("SIP/1002-00005e18", "CALLFILENAME=OUT1002-20140129-201651-1391044611.25063") in new stack
-- Executing [s@macro-record-enable:17] Goto("SIP/1002-00005e18", "record") in new stack
-- Goto (macro-record-enable,s,20)
-- Executing [s@macro-record-enable:20] MixMonitor("SIP/1002-00005e18", "OUT1002-20140129-201651-1391044611.25063.wav,,") in new stack
-- Executing [s@macro-record-enable:21] MacroExit("SIP/1002-00005e18", "") in new stack
-- Executing [981xxxxxxxxxx@from-internal:5] Macro("SIP/1002-00005e18", "dialout-trunk,8,1xxxxxxxxxx,") in new stack
-- Executing [s@macro-dialout-trunk:1] Set("SIP/1002-00005e18", "DIAL_TRUNK=8") in new stack
-- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/1002-00005e18", "0?sub-pincheck,s,1") in new stack
-- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/1002-00005e18", "0?disabletrunk,1") in new stack
-- Executing [s@macro-dialout-trunk:4] Set("SIP/1002-00005e18", "DIAL_NUMBER=1xxxxxxxxxx") in new stack
-- Executing [s@macro-dialout-trunk:5] Set("SIP/1002-00005e18", "DIAL_TRUNK_OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:6] Set("SIP/1002-00005e18", "OUTBOUND_GROUP=OUT_8") in new stack
-- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/1002-00005e18", "1?nomax") in new stack
-- Goto (macro-dialout-trunk,s,9)
-- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/1002-00005e18", "0?skipoutcid") in new stack
-- Executing [s@macro-dialout-trunk:10] Set("SIP/1002-00005e18", "DIAL_TRUNK_OPTIONS=") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("SIP/1002-00005e18", "outbound-callerid,8") in new stack
-- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/1002-00005e18", "0?Set(CALLERPRES()=)") in new stack
-- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/1002-00005e18", "0?Set(REALCALLERIDNUM=703)") in new stack
-- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/1002-00005e18", "1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,6)
-- Executing [s@macro-outbound-callerid:6] Set("SIP/1002-00005e18", "USEROUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:7] Set("SIP/1002-00005e18", "EMERGENCYCID=") in new stack
-- Executing [s@macro-outbound-callerid:8] Set("SIP/1002-00005e18", "TRUNKOUTCID=<1xxxxxxxxxx>") in new stack
-- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/1002-00005e18", "1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,12)
-- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/1002-00005e18", "1?Set(CALLERID(all)=<1xxxxxxxxxx>)") in new stack
-- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/1002-00005e18", "0?Set(CALLERID(all)=)") in new stack
-- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/1002-00005e18", "0?Set(CALLERID(all)=)") in new stack
-- Executing [s@macro-outbound-callerid:15] ExecIf("SIP/1002-00005e18", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack
-- Executing [s@macro-dialout-trunk:12] GosubIf("SIP/1002-00005e18", "0?sub-flp-8,s,1") in new stack
-- Executing [s@macro-dialout-trunk:13] Set("SIP/1002-00005e18", "OUTNUM=1xxxxxxxxxx") in new stack
== Begin MixMonitor Recording SIP/1002-00005e18
-- Executing [s@macro-dialout-trunk:14] Set("SIP/1002-00005e18", "custom=SIP/obivoice") in new stack
-- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/1002-00005e18", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default))") in new stack
-- Executing [s@macro-dialout-trunk:16] ExecIf("SIP/1002-00005e18", "0?Set(DIAL_TRUNK_OPTIONS=M(confirm))") in new stack
-- Executing [s@macro-dialout-trunk:17] Macro("SIP/1002-00005e18", "dialout-trunk-predial-hook,") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/1002-00005e18", "") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/1002-00005e18", "0?bypass,1") in new stack
-- Executing [s@macro-dialout-trunk:19] GotoIf("SIP/1002-00005e18", "0?customtrunk") in new stack
-- Executing [s@macro-dialout-trunk:20] Dial("SIP/1002-00005e18", "SIP/obivoice/1xxxxxxxxxx,300,") in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Called SIP/obivoice/1xxxxxxxxxx
-- SIP/obivoice-00005e19 is circuit-busy
== Everyone is busy/congested at this time (1:0/1/0)
-- Executing [s@macro-dialout-trunk:21] NoOp("SIP/1002-00005e18", "Dial failed for some reason with DIALSTATUS = CONGESTION and HANGUPCAUSE = 21") in new stack
-- Executing [s@macro-dialout-trunk:22] Goto("SIP/1002-00005e18", "s-CONGESTION,1") in new stack
-- Goto (macro-dialout-trunk,s-CONGESTION,1)
-- Executing [s-CONGESTION@macro-dialout-trunk:1] Set("SIP/1002-00005e18", "RC=21") in new stack
-- Executing [s-CONGESTION@macro-dialout-trunk:2] Goto("SIP/1002-00005e18", "21,1") in new stack
-- Goto (macro-dialout-trunk,21,1)
-- Executing [21@macro-dialout-trunk:1] Goto("SIP/1002-00005e18", "continue,1") in new stack
-- Goto (macro-dialout-trunk,continue,1)
-- Executing [continue@macro-dialout-trunk:1] GotoIf("SIP/1002-00005e18", "1?noreport") in new stack
-- Goto (macro-dialout-trunk,continue,3)
-- Executing [continue@macro-dialout-trunk:3] NoOp("SIP/1002-00005e18", "TRUNK Dial failed due to CONGESTION HANGUPCAUSE: 21 - failing through to other trunks") in new stack
-- Executing [continue@macro-dialout-trunk:4] Set("SIP/1002-00005e18", "CALLERID(number)=1002") in new stack
-- Executing [981xxxxxxxxxx@from-internal:6] Macro("SIP/1002-00005e18", "outisbusy,") in new stack
-- Executing [s@macro-outisbusy:1] Progress("SIP/1002-00005e18", "") in new stack
-- Executing [s@macro-outisbusy:2] GotoIf("SIP/1002-00005e18", "0?emergency,1") in new stack
-- Executing [s@macro-outisbusy:3] GotoIf("SIP/1002-00005e18", "0?intracompany,1") in new stack
-- Executing [s@macro-outisbusy:4] Playback("SIP/1002-00005e18", "all-circuits-busy-now&pls-try-call-later, noanswer") in new stack
-- <SIP/1002-00005e18> Playing 'all-circuits-busy-now.gsm' (language 'en')
-- <SIP/1002-00005e18> Playing 'pls-try-call-later.gsm' (language 'en')
== Spawn extension (macro-outisbusy, s, 4) exited non-zero on 'SIP/1002-00005e18' in macro 'outisbusy'
== Spawn extension (from-internal, 981xxxxxxxxxx, 6) exited non-zero on 'SIP/1002-00005e18'
-- Executing [h@from-internal:1] Hangup("SIP/1002-00005e18", "") in new stack
== Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/1002-00005e18'
1xxxxxxxxxx

 

[TwigsUSAN]

You are missing context=from-trunk and fromuser=XXXX

 

[kevin922]

that was it! thanks