R.I.P. install-cepstral on piaf green 32bit

marks

New Member
Joined
Sep 3, 2010
Messages
22
Reaction score
4
is not working..

Code:
root@phones:/usr/local/sbin $ install-cepstral
(standard_in) 1: syntax error
install-cepstral: line 60: [: -lt: unary operator expected
install-cepstral - 2.0.2 released on 050412
CentOS release 6.5 (Final) - 32 Bit
**********************************************************************
* In order to run this free and compiled program you must agree to  *
* the following:                                                    *
*                                                                    *
* 1. I agree to honor the terms of use set out below                *
* 2. I agree not to reverse engineer any of the binaries            *
* 3. I agree not to request the source code for this program        *
* 4. I agree to only run this program on a PBX in a Flash system,    *
* 5. I agree that this program is an 'independent and separate work' *
* 6. By typing Y, I agree that this act constitutes my legal        *
*    signature and agreement to all of these terms and conditions    *
*    of use.                                                        *
* 7. I agree that no warranty is expressed or implied for this      *
*    program including any warranty of fitness for any purpose.      *
*                                                                    *
* IF YOU DO NOT AGREE WITH THESE TERMS OF USE DO NOT USE THIS PROGRAM*
*                                                                    *
* Tap the Y key to agree to these terms or ENTER to exit            *
**********************************************************************
By using install-cepstral
**************************************************************************
* YOU AGREE TO ASSUME ALL RESPONSIBILITY                                *
* FOR USE OF THE PROGRAMS INCLUDED IN THIS INSTALLATION. NO WARRANTIES  *
* EXPRESS OR IMPLIED INCLUDING MERCHANTABILITY AND FITNESS FOR PARTICULAR*
* USE ARE PROVIDED. YOU ASSUME ALL RISKS KNOWN AND UNKNOWN AND AGREE TO  *
* HOLD WARD MUNDY, Ward Mundy & Associates, NERD VITTLES, TOM KING, KING *
* and Associates, AND THE PBX IN A FLASH DEVELOPMENT TEAM HARMLESS FROM  *
* ANY AND ALL LOSS OR DAMAGE WHICH RESULTS FROM YOUR USE OF THIS SOFTWARE*
* AS CONFIGURED. IF ANY OF THESE TERMS AND CONDITIONS ARE RULED TO BE    *
* UNENFORCEABLE, YOU AGREE TO ACCEPT ONE DOLLAR IN U.S. CURRENCY AS      *
* COMPENSATORY AND PUNITIVE LIQUIDATED DAMAGES FOR ANY AND ALL CLAIMS YOU*
* MIGHT HAVE.                                                            *
*                                                                        *
* If you do not agree with these terms and conditions of use, press      *
* Ctrl-C now. Otherwise, press Enter to proceed at your own risk        *...
**************************************************************************
Further by using install-cepstral you agree that:
**************************************************************************
* This program is protected under the Digital Millennium Copyright Act  *
* and European Union's EUCD. This means if you reverse engineer this    *
* program or distribute the plain text version of this program you are  *
* breaking the law and are subject to penalties which are severe. For    *
* further information or to report piracy of this program please contact *
* [email protected]                                                  *
*                                                                        *
* Press ENTER to continue                                                *
**************************************************************************
install-cepstral - 2.0.2 released on 050412
CentOS release 6.5 (Final) - 32 Bit
**********************************************************************
* This program can only be run once on a PBX in a Flash server. THERE*
* IS NO UNINSTALL METHOD FOR THIS PROGRAM. MAKE SURE YOU HAVE VALID  *
* BACKUPS! Tap the ENTER key to continue                            *
**********************************************************************
 
Now validating this program has not been run before
 
It appears that the install-cepstral has not been run before on this system!
install-cepstral - 2.0.2 released on 050412
CentOS release 6.5 (Final) - 32 Bit
**********************************************************************
* Welcome to install-cepstral! This program will install the Allison *
* synthesized voice onto your PBX in a Flash 2.0.6.X system. This    *
* install should work with either Asterisk 1.8 or 10.0 and 32 or 64  *
* bit installs. Please tap the ENTER key to begin                    *
**********************************************************************
 
Now detecing what versions are installed please be patient
(standard_in) 1: syntax error
install-cepstral: line 516: [: -lt: unary operator expected
install-cepstral - 2.0.2 released on 050412
CentOS release 6.5 (Final) - 32 Bit
**********************************************************************
* I am sorry. Your system does not meet the requirements            *
**********************************************************************
* REQUIRED                    DETECTED
*----------------------------- ------------------------
* Asterisk Version 1.8/10      | 11
* Freepbx Version 2.8/2.9/2.10 | 2.11.0.11
* PIAF Family Version 206X    | 20650
* CentOS Version 6.2 or higher |
* CentOS Type 32 or 64 bit    | 32 Bit
**********************************************************************
* Now exiting                                                        *
**********************************************************************
and I can't live without it, do I have to reinstall older version of PIAF to get Cepstral working?
 

rossiv

Guru
Joined
Oct 26, 2008
Messages
2,624
Reaction score
139
You do know that Cepstral changed their licensing scheme about two or so years ago, right? You have to buy an additional license to use it as live TTS (extra ~$200 IIRC). I am unsure whether or not you can still install the old version manually, but the install script most likely does not work any more.
 

marks

New Member
Joined
Sep 3, 2010
Messages
22
Reaction score
4
Code:
                                                                                  lqqqqqqqqqqqqqqqqqqqqqqqqSYSTEM INFORMATIONqqqqqqqqqqqqqqqqqqqqqqqqqqqk
                                                                                  x  Asterisk  = ONLINE  | Dahdi    = ONLINE  | MySQL    = ONLINE    x
                                                                                  x  SSH        = ONLINE  | Apache    = ONLINE  | Iptables  = ONLINE    x
                                                                                  x  Fail2ban  = ONLINE  | Internet  = ONLINE  | Ip6Tables = OFFLINE  x
                                                                                  x  Disk Free  = ADEQUATE| Mem Free  = ADEQUATE| NTPD      = ONLINE    x
                                                                                  x  SendMail  = ONLINE  | Samba    = OFFLINE | Webmin    = ONLINE    x
                                                                                  x  Ethernet0  = ONLINE  | Ethernet1 = N/A    | Wlan0    = N/A      x
                                                                                  x                                                                    x
                                                                                  x  PIAF Installed Version  = 2.0.6.2 under *VMWARE*                  x
                                                                                  x  FreePBX Version          = 2.11.0.11                              x
                                                                                  x  Running Asterisk Version = 10.0.0                                  x
                                                                                  x  Asterisk Source Version  = 10.0.0                                  x
                                                                                  x  Dahdi Source Version    = 2.6.0+2.6.0                            x
                                                                                  x  Libpri Source Version    = 1.4.12                                  x
                                                                                  x  IP Address              = 192.168.8.10 on eth0                    x
                                                                                  x  Operating System        = CentOS release 6.3 (Final)              x
                                                                                  x  Kernel Version          = 2.6.32-220.2.1.el6.i686 - 32 Bit        x
                                                                                  x  Incredible PBX 3 Version = 3.0.6                                  x
                                                                                  mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj
I have a new license (v6.0) and an old license (v5.0), v5.0 is working fine on the old PIAF.
 

marks

New Member
Joined
Sep 3, 2010
Messages
22
Reaction score
4
Okay version 5.1.0 of Cepstral is working now with PWhites TTS.

All I needed was a symbolic link to /usr/bin for swift.

Code:
ln -s /opt/swift/bin/swift /usr/bin/swift



I can confirm, even a licensed V6.0.1 swift voice does not.
I have raised a ticket but I bet its some licensing issue.
If it is, I can't see me doing business with them again.


thanks,
mark
 

darmock

PIAF Developer
Joined
Oct 18, 2007
Messages
2,892
Reaction score
98
Because of their licensing change we dropped any further development of the install program We left it out there for those who still have the old license however we don't support their model for making money. If they brought back a version of the old license we would update the install stuff.


Tom
 

marks

New Member
Joined
Sep 3, 2010
Messages
22
Reaction score
4
Agree %100, however, we should document these things for poor mugs like me :)
- I dished out another 12 bucks for the license upgrade.

thanks,
mark
 

marks

New Member
Joined
Sep 3, 2010
Messages
22
Reaction score
4
Just one thing, the 'install-cepstral' program had issues with the pbx versions and not the swift versions rendering 'install-cepstral' useless with current PIAF releases.
Perhaps remove the version check?

thanks,
marks
 

darmock

PIAF Developer
Joined
Oct 18, 2007
Messages
2,892
Reaction score
98
nope we will remove the program entirely I think.


Tom
 

wardmundy

Nerd Uno
Joined
Oct 12, 2007
Messages
19,207
Reaction score
5,233
Cepstral had its day. It's over! To understand why Cepstral now is a complete waste of money, check out the free GoogleTTS application (included in Incredible PBX) by calling...
BcQC4fNCMAEyreA.jpg:large


The IVR menu was generated in its entirety with a single command using googletts-cli.pl:
Code:
googletts-cli.pl -t "Hi: Thank you for calling. To call by name, press 1: To join the conference, press 2: For Wolf Ram Alpha: press three: To speak to Mister Lenny: press four: For today's news headlines, press 5: For today's weather forecast, press 6. For today in history, press 7. Or press 8 for the house phones and speak to a real person." -r 8000 -o ivr.wav
 

Members online

Forum statistics

Threads
25,826
Messages
167,871
Members
19,252
Latest member
macrohat
Get 3CX - Absolutely Free!

Link up your team and customers Phone System Live Chat Video Conferencing

Hosted or Self-managed. Up to 10 users free forever. No credit card. Try risk free.

3CX
A 3CX Account with that email already exists. You will be redirected to the Customer Portal to sign in or reset your password if you've forgotten it.
Top