QUESTION Help installing FXS card

[gotel]

I recently installed a FXS module on my Sangoma A200 Remora board. I now have one FXO module and one FXS module.

I am having difficulty getting the FXS module to work. I think I have it properly configured. Below is /etc/asterisk/chan_dahdi.conf

Below that is a screen shot of the Dahdi generic extension I created.

What am I doing wrong. I have a analog phone connected to port 2 of the FXS port and it does not have dial tone.

Thanks,

;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
;autogenrated on 2013-07-20
;Dahdi Channels Configurations
;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak

[trunkgroups]

[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no



;Sangoma AFT-200 [slot:1 bus:3 span:1] <wanpipe1>
context=from-zaptel
group=0
echocancel=yes
signalling = fxs_ks
channel => 1

context=from-zaptel
group=0
echocancel=yes
signalling = fxs_ks
channel => 2

context=from-zaptel
group=0
echocancel=yes
signalling = fxs_ks
channel => 3

context=from-zaptel
group=0
echocancel=yes
signalling = fxs_ks

channel => 4

 

[gotel]

I found the solution. I had to download the dahdi.conf module and configure it. Once I did that I am now able to call out using the analog phone.