TRY THIS GXP 1450 Dialing Intercom(*80XXX ) busy

[Yahdie]

When I dial *80XXX I get busy (see snippet below)
Paging and Intercom 2.11.0.9 Schmooze Com Inc Enabled
*80 enabled

 Using SIP RTP TOS bits 184
  == Using SIP RTP CoS mark 5
    -- Called SIP/301
    -- Connected line update to SIP/300-00000200 prevented.
    -- SIP/301-00000202 is ringing
    -- Nobody picked up in 5000 ms
    -- Executing [*80301@ext-intercom:28] ExecIf("SIP/300-00000200", "?Return()") in new stack
    -- Executing [*80301@ext-intercom:29] Busy("SIP/300-00000200", "20") in new stack

 

[mainenotarynet]

I've had a similar issue with my GXP1405's (I think they are similar firmware versions)

Try rebooting the phone in question -- that fixes mine.

But yes, I'd like to find the REAL reason this happens.

 

[Yahdie]

Try rebooting the phone in question -- that fixes mine.

That doesn't sound like a viable long-term solution, but at least I'm not alone!

 

[mainenotarynet]

Your Right -- it's not great for a long term solution --- read my last line.

I don't know if it's the firmware, the phone itself, or the PiaF/FreePBX/Asterisk box.

All I know is if I reboot the phone that gets the busy signal, it works again (happens on my GXP1405's(x2) and My 2140's(x2) -- not very often as paging works fine and it's few and far between.

Any GS Zen Gods in here , can you help us?

 

[Yahdie]

Rebooting doesn't seem to help

 

[Yahdie]

I found this thread:
http://pbxinaflash.com/community/index.php?threads/alertinfo-and-paging-issue.12233/
Post#13 the log has the exact same issue:
His:

Called SIP/1003
-- Connected line update to SIP/1001-00000000 prevented.
-- SIP/1003-00000002 is ringing
-- Nobody picked up in 5000 ms

Mine:

-- Called SIP/301
-- Connected line update to SIP/300-00000200 prevented.
-- SIP/301-00000202 is ringing
-- Nobody picked up in 5000 ms

From Nunya regarding the Polycom

change "info=Auto Answer" to "Ring Answer".