GO HERE Gotcha-Free PBX: CallerID Settings

[mbgusa]

Can anyone help me figure out where this install of RentPBX Gotcha-free is getting the (800) 555-1212 caller ID on this outbound Vitelity DID?

I think I've tried every combination of data in Users, Trunks, Options and Vitelity settings for caller ID, but can't seem to override this with the correct number.

Thanks!

Mar 9 11:52:48.382 AM xx.xxx.xx.xxx > 6xxxxxx.xx.xxx INVITE sip: xxxxxxxxxx @inbound24.vitelity.net SIP/2.0
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP xx.xxx.xx.xxx:5060;branch=xxxxxxxxxxxxxxx
Max-Forwards: 70
From: \"6001\" <sip:[email protected]>;tag=as28exxxxxx
To: <sip:[email protected]>
Contact: <sip:[email protected]:5060>
Call-ID: [email protected]:xxxx
CSeq: 102 INVITE
User-Agent: Asterisk PBX 11.16.0
Date: Mon, 09 Mar 2015 17:52:54 GMT
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE
Supported: replaces, timer
Remote-Party-ID: \"6001\" <sip:[email protected]>;party=calling;privacy=off;screen=no
Content-Type: application/sdp
Content-Length: 511


v= 0
o= root 7620xxxxxx 7620xxxxx IN IP4 xx.xxx.xx.xxx
s= Asterisk PBX 11.16.0
c= IN IP4 xx.xxx.xx.xxx
t= 0 0
m= audio 19494 RTP/AVP 0 3 8 101
a= rtpmap:0 PCMU/8000
a= rtpmap:3 GSM/8000
a= rtpmap:8 PCMA/8000
a= rtpmap:101 telephone-event/8000
a= fmtp:101 0-16
a= ptime:20
a= ice-ufrag:xxxxxxxxxxxxxxxxx
a= ice-pwd:xxxxxxxxxxxxxxxxx
a= candidate:H43ca6289 1 UDP xxxxxxx xx.xxx.xx.xxx 19494 typ host
a= candidate:H43ca6289 2 UDP xxxxxxx xx.xxx.xx.xxx 19495 typ host

a= sendrecv

 

[jrglass]

Did you set your caller id in Vitelity settings incredible apps

Jeff

 

[mbgusa]

Thanks Jeff - yes, it's set there as well.

 

[mbgusa]

Current Vitelity Settings


CID_vitelity = XXXXXXXXXX

;!
;! Automatically generated configuration file
;! Filename: users.conf (/etc/asterisk/credentials_vitelity.conf)
;! Generator: Manager
;! Creation Date: Mon Mar 9 14:50:50 2015
;!
; Vitelity trunk Prefix: Dial 8
[Vitelity]
trunkname = Vitelity \; GUI metadata \; GUI metadata
context = DID_Vitelity
hasexten = no
hasiax = no
hassip = yes
registeriax = no
registersip = yes
trunkstyle = voip
insecure = port,invite



host = inbound24.vitelity.net
username = XXXXXXXXXX
secret = XXXXXXXXXXXXX

 

[wardmundy]

All of the CallerID settings are in /etc/asterisk/credentials.conf. Just restart Asterisk after making changes.

 

[mbgusa]

Yep - that was it. Despite the entries in Users, Options, and Incredible Apps settings, /etc/asterisk/credentials.conf still had the following which overrode the other settings. Thanks very much for the help!

; CallerID numbers
CID_allroutes = 8005551212
CID_CallCentric = 8005551212
CID_ipcomms = 8005551212
CID_lesnet = 8005551212
CID_anveodirect = 8005551212

 

[Dave Gray]

NB. Vitelity id is set on the fly... If you have a follow-me set up, it shows the calling ID, not the DID number (which took me by surprise - I was getting calls on my cell that I didn't think I should have, not realizing that it was the forward.)