TIPS 40 sec delay to dial out

[sergiocesar]

Just installed a latest "GREEN" then incredible11 with incrediblefax.
set my trunk and ext. called in OK. but when I call out it takes 40 sec to actual place the call.
it seems stuck waiting for something.

The log show: ZZZZZZZZZZ replaced to protect the innocent.....



[2014-10-11 10:46:54] VERBOSE[4014][C-00000021] pbx.c: -- Executing [s@macro-dialout-trunk-predial-hook:7] Set("SIP/2120-00000031", "lookupcid=ZZZZZZZZZZ") in new stack
[2014-10-11 10:46:54] VERBOSE[4014][C-00000021] pbx.c: -- Executing [s@macro-dialout-trunk-predial-hook:8] Set("SIP/2120-00000031", "CALLERID(name)=") in new stack

note HUGE delay here................................

[2014-10-11 10:47:57] VERBOSE[4014][C-00000021] pbx.c: -- Executing [s@macro-dialout-trunk-predial-hook:9] Set("SIP/2120-00000031", "lookupcid=") in new stack
[2014-10-11 10:47:57] VERBOSE[4014][C-00000021] pbx.c: -- Executing [s@macro-dialout-trunk-predial-hook:10] Set("SIP/2120-00000031", "CALLERID(name)=") in new stack
[2014-10-11 10:47:57] VERBOSE[4014][C-00000021] pbx.c: -- Executing [s@macro-dialout-trunk-predial-hook:11] NoOp("SIP/2120-00000031", "*** ***") in new stack
[2014-10-11 10:47:57] VERBOSE[4014][C-00000021] pbx.c: -- Executing [s@macro-dialout-trunk-predial-hook:12] Set("SIP/2120-00000031", "CDR(accountcode,r)=") in new stack
[2014-10-11 10:47:57] VERBOSE[4014][C-00000021] pbx.c: -- Executing [s@macro-dialout-trunk-predial-hook:13] Set("SIP/2120-00000031", "CONNECTEDLINE(num,i)=ZZZZZZZZZZ") in new stack

snip a few lines.....

2014-10-11 10:47:57] VERBOSE[4014][C-00000021] pbx.c: -- Executing [s@macro-dialout-trunk:20] Dial("SIP/2120-00000031", "SIP/ATT1/ZZZZZZZZZZ,300,Tt") in new stack

 

[briankelly63]

http://pbxinaflash.com/community/index.php?threads/strange-dialing-delay.15727/#post-101726

 

[Trimline2]

macro-dialout-trunk-predial-hook can be found in Other - Config Edit - extensions_custom.conf. It sounds to me that you may need to modify the outbound callerid lookup. If you read the script, you can adjust it accordingly. May be a time-out issue with one of the providers.

Also, what happens when you press the # after entering a telephone number?

 

[sergiocesar]

the # did not do anything to make it better but....
commented out all entries in extensions_custom.conf under macro-dialout-trunk-predial-hook. All good now.
This should be in a setting on the GUI and not hardcoded.......