FYI 2.0.6.4.3 ISO on sourceforge

[atsak]

Downloaded this twice now; during setup I get a warning I'm using the 2.0.6.4.1 ISO and that it's not supported. Different hardware etc too. ISO is called pbxinaflash20643-i386.iso

Have I gone mental?

 

[wardmundy]

Actually it's 20643 that's gone mental. New ISO will be out shortly.

 

[tenriquez]

Actually it's 20643 that's gone mental. New ISO will be out shortly.

I'm having the same issue as atsak...

 

[Prits]

I had the same issue but continued with the install on one of my sandboxes (machine A) regardless and all seems to be fine... still in 'playing' mode, I have yet to test most of it out...

Now... I thought I would install this on another sandbox (machine B) (Intel P4 with 2GB RAM 80GB Hard drive) which is running:

PBX in a Flash PURPLE Status Program

──────────────────────────────────────────────────────────────────────────────

┌────────────────────────SYSTEM INFORMATION───────────────────────────┐

│ Asterisk = ONLINE | Dahdi = ONLINE | MySQL = ONLINE │

│ SSH = ONLINE | Apache = ONLINE | Iptables = ONLINE │

│ Fail2ban = ONLINE | Internet = ONLINE | Ip6Tables = ONLINE │

│ Disk Free = ADEQUATE| Mem Free = ADEQUATE| NTPD = ONLINE │

│ SendMail = ONLINE | Samba = OFFLINE | Webmin = ONLINE │

│ Ethernet0 = ONLINE | Ethernet1 = N/A | Wlan0 = N/A │

│ │

│ PIAF Installed Version = 2.0.6.2 under *HARDWARE* │

│ FreePBX Version = 2.9.0.12 │

│ Running Asterisk Version = 1.8.8.0 │

│ Asterisk Source Version = 1.8.8.0 │

│ Dahdi Source Version = 2.5.0.2 │

│ Libpri Source Version = 1.4.12 │

│ IP Address = 192.168.0.102 on eth0 │

│ Operating System = CentOS release 6.2 (Final) │

│ Kernel Version = 2.6.32-220.7.1.el6.i686 - 32 Bit │

│ Incredible PBX 3 Version = 3.0.7 │
└─────────────────────────────────────────────────────────────────────┘

But when I boot from the install ISO, I get:
"Not enough RAM to install Centos OS" and the install process ends

Machine B is a better spec machine than Machine A yet machine A wizzed right through and machine B does not get as far at all!

Any ideas please?

Thank you in advance!

 

[murphy1969]

Just downloaded the iso today and having the same problem. Any solutions ?

 

[atsak]

Just downloaded the iso today and having the same problem. Any solutions ?

No solution required really - just say OK and continue. Everything works fine.

 

[darmock]

Yep that is there to warn you that you are using an outdated ISO and that all features that may be required by the install program may not be available. There were several issues in the fractional 2064X series which is why the 20644 version will be out RSN. This addresses all of the existing issues except for the keyboard errors on some hardware which will never be solved. If you guys would only take our advice and use the very latest ISO EVERY time problems can be avoided. That being said I was outvoted at our virtual PIAF Developers table to force you guys to always use the latest ISO. Oh well you all have the right to go your own way..


Tom

 

[murphy1969]

Thank you.

 

[murphy1969]

Just downloaded the new 230644 this morning. Will be installing this evening. Will keep you all posted on the installation.

 

[darmock]

Use the announcement of the ISO thread to provide us with any feedback please. We have also updated the code so anyone using the old 20643 ISO will be warned.

 

[murphy1969]

Dumb question but how do I get to the announcement of the ISO thread.

 

[PBX@Home]

Here you go:

http://pbxinaflash.com/community/index.php?threads/its-soup-piaf-2-0-6-4-4-vm.12764/