Update!
Skype static version 2 was removed from Arch Linux site so, I have create a new setup-skype-4.pl. This time will download v4.2.0.11 off Skype website. The rest of the step still still the same except you need to enable the sound back on. Just run setup-skype-4.pl instead of setup-skype-new.pl.
Goal:
- To integrate Skype to PIAF
- Ability to have multiple Skype channels with same username and multiple usernames.
- No need for dedicate server to run FreeSwitch
Credits/References:
1. Big thanks to Bill Simon who wrote This Guide
2. FreeSwitch WiKi
3. PIAF Members: Ward, w1ve, Geo...
Before You Start:
1. Make sure you have no sound driver loaded especially OSS by disable sound device in your bios or VM setting.
2. Run lsmod | grep snd ; You should see nothing
3. If you are on RentPBX, run yum install libXfont
Let's Get Started:
For those who use Ward VM with Skype support please skip install-freeswitch step, just replace freeswitch.xml and run setup-skype-new.pl
1. Download attach file, unrar and copy files to /root
2. Run
3. Let the script running, come back in about 15 mins and follow on-screen Skype channel setup
4. Run
5. Wait for a few minutes and then login to your Skype desktop or mobile with another username and make sure Skype username that you set up for Freeswitch is not offline (Green or Yellow is fine)
6. Set up Trunk in FreePBX (Connectivity->Trunks)
7. Setup Inbound route in FreePBX (Connectivity->Inbound Routes)
8. Set up Outbound route in FreePBX (Connectivity->Outbound Routes)
9. Add local network to Asterisk Sip Setting (Settings->Asterisk Sip Settings)
10. Run
11. Make a test call
12. If you want to change user or number of channels, you can run /root/setup-skype-new.pl anytime.
13. If everything works fine then
FAQ:
Skype static version 2 was removed from Arch Linux site so, I have create a new setup-skype-4.pl. This time will download v4.2.0.11 off Skype website. The rest of the step still still the same except you need to enable the sound back on. Just run setup-skype-4.pl instead of setup-skype-new.pl.
Goal:
- To integrate Skype to PIAF
- Ability to have multiple Skype channels with same username and multiple usernames.
- No need for dedicate server to run FreeSwitch
Credits/References:
1. Big thanks to Bill Simon who wrote This Guide
2. FreeSwitch WiKi
3. PIAF Members: Ward, w1ve, Geo...
Before You Start:
1. Make sure you have no sound driver loaded especially OSS by disable sound device in your bios or VM setting.
2. Run lsmod | grep snd ; You should see nothing
3. If you are on RentPBX, run yum install libXfont
Let's Get Started:
For those who use Ward VM with Skype support please skip install-freeswitch step, just replace freeswitch.xml and run setup-skype-new.pl
1. Download attach file, unrar and copy files to /root
2. Run
3. Let the script running, come back in about 15 mins and follow on-screen Skype channel setup
4. Run
5. Wait for a few minutes and then login to your Skype desktop or mobile with another username and make sure Skype username that you set up for Freeswitch is not offline (Green or Yellow is fine)
6. Set up Trunk in FreePBX (Connectivity->Trunks)
7. Setup Inbound route in FreePBX (Connectivity->Inbound Routes)
8. Set up Outbound route in FreePBX (Connectivity->Outbound Routes)
9. Add local network to Asterisk Sip Setting (Settings->Asterisk Sip Settings)
10. Run
11. Make a test call
12. If you want to change user or number of channels, you can run /root/setup-skype-new.pl anytime.
13. If everything works fine then
FAQ: