Help, I’ve been wrestling with this for a couple of days and am not getting anywhere with trying to upgrade my modules.
I’m a longtime PIAF user and have installed PAIF many times. Never had this sort of issue.
I hope someone can give me some suggestions.
Below is my issue.
Thanks in advance
Best regards
Greg
Problem:
I have a newly created PBX. It installed fine. I’ve connected extensions and can make calls so everything appears ok.
My next step was to try to upgrade the modules. In Module Administration, I’m able to click on Check Online and get a list of modules that can be upgraded. So I click on Upgrade All, and then I click on Process.
I get the following type of messages:
Please wait while module actions are performed
Downloading announcement Error(s) downloading announcement:
Downloading backup Error(s) downloading backup:
Downloading blacklist Error(s) downloading blacklist:
Downloading bulkdids Error(s) downloading bulkdids:
Downloading bulkextensions Error(s) downloading bulkextensions:
What’s strange is that from the Linux command line, I’m able to wget these modules so I don’t think connectivity to the internet is an issue.
Here’s the status page of my PBX.
┌───────────────────SYSTEM INFORMATION *VERIFIED*─────────────────────┐
│ Asterisk = ONLINE | Dahdi = ONLINE | MySQL = ONLINE │
│ SSH = ONLINE | Apache = ONLINE | Iptables = ONLINE │
│ Fail2ban = ONLINE | Internet = ONLINE | Ip6Tables = ONLINE │
│ Disk Free = ADEQUATE| Mem Free = ADEQUATE| NTPD = ONLINE │
│ SendMail = ONLINE | Samba = OFFLINE | Webmin = ONLINE │
│ Ethernet0 = ONLINE | Ethernet1 = N/A | Wlan0 = N/A │
│ │
│ PIAF Installed Version = 2.0.6.4 under *KVM* │
│ FreePBX Version = 2.10.0.2 │
│ Running Asterisk Version = 1.8.23.0 │
│ Asterisk Source Version = 1.8.23.0 │
│ Dahdi Source Version = 2.7.0 │
│ Libpri Source Version = 1.4.12 │
│ IP Address = xx.xx.xx.xxx on eth0 │
│ Operating System = CentOS release 6.4 (Final) │
│ Kernel Version = 2.6.32-358.6.2.el6.x86_64 - 64 Bit │
│ │
└─────────────────────────────────────────────────────────────────────┘
Hopefully, someone can give me some suggestions to try.
Thanks so much in advance
Best regards
Greg
I’m a longtime PIAF user and have installed PAIF many times. Never had this sort of issue.
I hope someone can give me some suggestions.
Below is my issue.
Thanks in advance
Best regards
Greg
Problem:
I have a newly created PBX. It installed fine. I’ve connected extensions and can make calls so everything appears ok.
My next step was to try to upgrade the modules. In Module Administration, I’m able to click on Check Online and get a list of modules that can be upgraded. So I click on Upgrade All, and then I click on Process.
I get the following type of messages:
Please wait while module actions are performed
Downloading announcement Error(s) downloading announcement:
- Unable to connect to servers from URLs provided: http://mirror.freepbx.org/modules/release/2.10/announcement-2.10.0.2.tgz
Downloading backup Error(s) downloading backup:
- Unable to connect to servers from URLs provided: http://mirror.freepbx.org/modules/release/2.10/backup-2.10.0.41.tgz
Downloading blacklist Error(s) downloading blacklist:
- Unable to connect to servers from URLs provided: http://mirror.freepbx.org/modules/release/2.10/blacklist-2.10.0.2.tgz
Downloading bulkdids Error(s) downloading bulkdids:
- Unable to connect to servers from URLs provided: http://mirror.freepbx.org/modules/release/2.10/bulkdids-2.10.0.5.tgz
Downloading bulkextensions Error(s) downloading bulkextensions:
- Unable to connect to servers from URLs provided: http://mirror.freepbx.org/modules/release/2.10/bulkextensions-2.10.0.3.tgz
What’s strange is that from the Linux command line, I’m able to wget these modules so I don’t think connectivity to the internet is an issue.
Here’s the status page of my PBX.
┌───────────────────SYSTEM INFORMATION *VERIFIED*─────────────────────┐
│ Asterisk = ONLINE | Dahdi = ONLINE | MySQL = ONLINE │
│ SSH = ONLINE | Apache = ONLINE | Iptables = ONLINE │
│ Fail2ban = ONLINE | Internet = ONLINE | Ip6Tables = ONLINE │
│ Disk Free = ADEQUATE| Mem Free = ADEQUATE| NTPD = ONLINE │
│ SendMail = ONLINE | Samba = OFFLINE | Webmin = ONLINE │
│ Ethernet0 = ONLINE | Ethernet1 = N/A | Wlan0 = N/A │
│ │
│ PIAF Installed Version = 2.0.6.4 under *KVM* │
│ FreePBX Version = 2.10.0.2 │
│ Running Asterisk Version = 1.8.23.0 │
│ Asterisk Source Version = 1.8.23.0 │
│ Dahdi Source Version = 2.7.0 │
│ Libpri Source Version = 1.4.12 │
│ IP Address = xx.xx.xx.xxx on eth0 │
│ Operating System = CentOS release 6.4 (Final) │
│ Kernel Version = 2.6.32-358.6.2.el6.x86_64 - 64 Bit │
│ │
└─────────────────────────────────────────────────────────────────────┘
Hopefully, someone can give me some suggestions to try.
Thanks so much in advance
Best regards
Greg