GO HERE No dial tone on a new Rhino FXS channel bank

[ghurty]

We have two Rhino T1 cards. One R2T1 and one R4T1.
We need 5 of the T1 lines configured to work with 5 Rhino CB-24 FXS Channel banks. When we hooked up the channel bank, there is no dial tone. We synced the AutoT1 and we had Rhino configure the T1 cards. The rhino techs spent two hours trying to get the dial tone but they couldnt. It isnt a prolem with the channel bank as we tried all 5 of them.

Any suggestions?

Thank you

 

[wardmundy]

Talk to James on the FreePBX Forum. He used to work for Rhino.

 

[synack]

I'm not an analog expert by any means, but it might be helpful to others if you posted what your dahdi config files are.
Also, I might be mistaken, but I thought FXS provides ring and dialtone? is the unit recognizing the off hook condition? Are you in the right FXS mode for your handset? are your handsets analog? can you configure a channel for loop start and connect a plain old telephone or butt set to test?