From: http://pbxinaflash.com/community/index.php?threads/incredible-pbx-for-pogoplug-4.15508/
First step you need to install 2014.07 U-Boot img
The Qui Hong blog explains it well what i did except i went to 2014.07 U-Boot forums and changed the fw_setenv arcNumber to '2998' fw_setenv machid to '' for dockstar.
For rootfs (pogoplugv4) img, I untarred it and I flashed the usb drive with Win32 disk Imager.
so, the image works fine no module problems and a Green led.
@tycho: 3.2.0-4-kirkwood? 2014.07 U-Boot images supports 3.16+. The pogoplugv4 img runs on 3.14.0-kirkwood.What version u-boot are you using?
Hey Jeffrccar: can you post in this thread:
http://pbxinaflash.com/community/index.php?threads/incredible-pbx-for-dockstar-pogoplug-e02.15650/
... the steps you took to make a Dockstar reliably boot the Pogo image with all modules working and "green?"
If you read that thread several of us had some issues. I for one had to copy the "3.2.0-4-kirkwood" folder from my original Dockstar Debian+Asterisk install USB flashdrive to the new-from-pogo-image /lib/modules folder. And that resulted in some after-effects later on when trying to update things.
First step you need to install 2014.07 U-Boot img
The Qui Hong blog explains it well what i did except i went to 2014.07 U-Boot forums and changed the fw_setenv arcNumber to '2998' fw_setenv machid to '' for dockstar.
For rootfs (pogoplugv4) img, I untarred it and I flashed the usb drive with Win32 disk Imager.
so, the image works fine no module problems and a Green led.
@tycho: 3.2.0-4-kirkwood? 2014.07 U-Boot images supports 3.16+. The pogoplugv4 img runs on 3.14.0-kirkwood.What version u-boot are you using?