Jay Deal
Phhhhhhhhttttttt :)
- Joined
- Dec 26, 2013
- Messages
- 267
- Reaction score
- 85
I installed Hylafax and Iaxmodem on my Pogoplug E02 following some of the various guides on the interwebs. The Hylafax server works correctly and the modem I configured in Iaxmodem registers to Asterisk as it should. I set up an inbound route for my fax DID (GV) which works correctly as well - inbound fax calls are sent to Hylafax and it receives the fax and sends a copy to me in an email.
Where my problem lays, I keep getting "no carrier detected" error when sending a fax from my desktop via Winfax Print Reloaded. The job is processed correctly and I know Asterisk connects to the remote fax machine (which is a known good fax number / machine) and the remote answers but for some reason there is a disconnect between connecting and actually starting the transmission process. Again I can receive faxes but I cannot send them.
Beyond setting up the IAX2 extension in */Freepbx, is there any other thing you need to setup in FreePBX in order to send a fax out via Iaxmodem? Do I need a custom trunk or destination? Any experience you could share would be greatly appreciated.
Where my problem lays, I keep getting "no carrier detected" error when sending a fax from my desktop via Winfax Print Reloaded. The job is processed correctly and I know Asterisk connects to the remote fax machine (which is a known good fax number / machine) and the remote answers but for some reason there is a disconnect between connecting and actually starting the transmission process. Again I can receive faxes but I cannot send them.
Beyond setting up the IAX2 extension in */Freepbx, is there any other thing you need to setup in FreePBX in order to send a fax out via Iaxmodem? Do I need a custom trunk or destination? Any experience you could share would be greatly appreciated.